Snappi Size 2 Doubler Packs

#SD2 Snappi- Size 2 Doubler Packs

The Snappi® Diaper Fastener has revolutionized cloth diapering! This PINLESS diaper fastener offers a practical and reliable way to fasten a cloth diaper and has become the most important cloth diapering accessory in the world. Over 50 million have sold worldwide.

An EASY to use fastener that offers a PRACTICAL and RELIABLE way to fasten a cloth diaper, replacing the diaper pin. It comes in a variety of colors and is made from a stretchable non-toxic material, which is T-shaped with grips on each end. These grips hook into the diaper fabric to ensure a snug-fitting diaper with enough natural movement for the baby.

DIRECTIONS FOR USE:
Snappi® fasteners need to be used correctly in order to work effectively.

1. STRETCH the Snappi® fastener before its first use. The stretching triggers the 'memory' of the Snappi® to return to its original size and in so doing, pulls the diaper together to the middle to allow for a snug fit. This is essential for the Snappi® to work properly. This can be done by holding the Snappi® in the center with one hand and close to the end of the leg with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel how the material 'softens' or gets more elastic. Follow this stretching procedure with each leg. The Snappi® is now ready to go!

2. Make sure that the Snappi® is ATTACHED SECURELY. It is important that the Snappi® 'leg' being attached be stretched across the diaper before hooking it into the diaper. So,

Hook Left,
Stretch ACROSS and Hook Right,
Stretch DOWN and Hook Center

In other words, the Snappi® fastener should go from a ‘T’ shape to a ‘Y’ shape.

By following these instructions, the Snappi® should be secure, the diaper will fit snugly and the baby should not be able to undo it. ALWAYS place a cover over the diaper and Snappi® fastener.

Snappi®s WORK BEST with Snappi® terry cloth diapers, cotton prefolds (Chinese or DSQ), and other cloth diapers with a loose enough weave for the Snappi to hook into. They DO NOT work well flannel or any other tightly woven diapers, even most hemp diapers.

WARNING:
1. ALWAYS use a cover when using a Snappi® fastener on your baby’s diaper.
2. Keep out of children’s reach when not in use!
3. Do not use your Snappi® for longer than 6 months.
4. Do not leave your Snappi® lying in the sun as it is not UV resistant and can reduce the effectiveness of the Snappi®.

CARE: Clean your Snappi® in hot soapy water. Do not launder them with diapers in the washer as this may weaken the grip attachment.

CAUTION: Any tear in the Snappi® can lead to separation of a piece, presenting a possible choking hazard. Do not cut your Snappi® as this could create weak spots in your Snappi®. Do not pull on the side strips of the Snappi® when attaching it, as this can cause them to break. These strips serve as a safety feature only, as mentioned above. Use the flat tabs for leverage. Inspect your Snappi® before each use and discontinue use immediately if there is any sign of cracking, tearing, breakage or wear of the teeth or any other parts.

Price:

$6.50

Sorry, item is temporarily out of stock